You may address this by turning off the projector before it force-shuts itself. If the different LEDs behave as indicated above, the projector is likely overheating and shall shut down automatically at any time. The Temperature Light is a Steady Orange, While the Status Light Blinks Blue Turn off the device, unplug it, and get in touch with Epson. If the temperature and lamp lights are a steady orange and the status light flashes blue, the internal boards likely have some power issues. Temperature and Lamp Lights are Steady Orange, While Status Light Blinks Blue To remedy the issue, turn off the projector, unplug its power cable, and contact Epson. The transfer of settings helps not having to set up the new device from scratch or per your preference again. The different settings usually transferred relate to the picture (projected image’s brightness, color temperature, contrast, aspect ratio, etc.), keystone correction, connectivity and network settings, system preferences, etc. Maybe the method or process employed to connect the projectors, access on-screen menus, use software, etc., to augment the transfer was not the one prescribed by the projector company. The writing process could have failed when moving settings between different projectors, causing a projector error. Temperature and Lamp Lights Blink Orange Rapidly, While Status and Power Lights Blink Blue Rapidly Try removing the USB cord or flash drive, unplugging the power cable, and reinserting them to check if that solves the problem. A locked or encrypted USB flash drive could also cause the problem. Perhaps the settings file was corrupt, or the USB cable or flash drive wasn’t connected properly. Temperature and Lamp Lights Blink Orange Rapidly, While Status and Power Lights Show a Varied Light PatternĪny error or discrepancy when transferring or copying settings between projectors could cause the lights to go up in the abovementioned pattern. I will repeat this one last time: You should always contact Epson when there’s a complex issue on hand with your projector. This, again, is a complex problem and needs the attention of Epson support or a certified technician. If the above is true, the Auto iris feature is likely broken. Both Temperature and Lamp Lights Blink Orange While Status Light Flashes Blue Power on the projector again and check whether the lights blink the same way again. In such scenarios, shut down the device immediately and allow it to cool for some time – usually a few minutes or until the projector body is no longer hot to the touch. Your projector is extremely hot or very likely overheating. Temperature Light Blinks Orange While Power Light Blinks Blue I also found a written DIY guide for fixing the projector sensor. If you are handy with electronics, especially projectors, use the below fan troubleshooting video as a guide: The certified technician will expertly diagnose and fix the problem. The scenario is complicated, and troubleshooting must be done after contacting Epson support, mainly if the device is still under warranty. If a sensor or fan within the projector breaks or doesn’t work correctly, the temp and status lights blink in the pattern mentioned above. Temperature Light Blinks Orange While the Status Light Flashes Blue Let’s delve into the deets of the specific behaviors mentioned above individually. The projector has overheated and turned off The writing process when moving settings between two projectors could have failed, and the projector communicates the status. It is possible that the settings file on a USB flash drive is corrupt when you transfer settings between projectors, or that the USB cable or flash drive is not properly connected. The projector is too hot and might be overheated. Here is an overview of what the different lights, the colors they blink in, and what those flashing lights mean: If the temperature light blinks and the Epson is not performing as expected, there’s likely something wrong with the device. Those are power, status, lamp, and temp (temperature).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |